set protocols snmp contact

Owned by Tracy Yang
Jul 18, 2024
1 min read

The set protocols snmp contact command configures the contact information for system maintenance. If a device fails, maintenance engineer can contact the vendor for device maintenance.


Command Syntax
set protocols snmp contact <contact>
delete protocols snmp contact


Parameter

Parameter

Description

contact <contact>Specifies contact information of system maintenance. The value is a string.


Example

 •This example configures the contact information for system maintenance.

admin@XorPlus# set protocols snmp contact support.pica8.com
admin@XorPlus# commit




Copyright © 2024 Pica8 Inc. All Rights Reserved.