To add a VXLAN VNI to BGP EVPN routing, run the command set protocols bgp evpn vni. Optional parameter vrf can be used to specify a VRF, if no VRF is specified the command takes effect on the default VRF.

The command delete protocols bgp evpn vni can be used to remove this configuration.

Command Syntax

set protocols bgp [vrf <vrf-name>] evpn vni <vni>

delete protocols bgp [vrf <vrf-name>] evpn vni <vni>

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies the name of the VRF. The value is a string.
vni <vni>	Specifies the VNI to add to the BGP EVPN routing. The value is an integer that ranges from 1 to 16777215.

Example

Configure the device to add VNI 20 to EVPN BGP routing in VRF BLUE.

admin@Xorplus# set protocols bgp vrf BLUE evpn vni 20
admin@Xorplus# commit

Browser not supported