set protocols spanning-tree interface enable

Owned by Tracy Yang
Jul 18, 2024
1 min read

The set protocols spanning-tree interface enable command can be used to enable or disable spanning tree protocol on a specific interface.

The delete protocols spanning-tree interface enable command deletes the configuration.


Command Syntax

set protocols spanning-tree interface <interface-name> enable <true | false>

delete protocols spanning-tree interface <interface-name> enable


Parameters

Parameter

Description

interface <interface-name>

Specifies the interface name. The value is a physical port or an LAG port.

enable <true | false>

Enable or disable spanning tree protocol on a specific interface. The value could be true or false.

  • true: Enable spanning tree protocol.
  • false: Disable spanning tree protocol.

By default, spanning tree protocol is enabled.


Example

  • Disable spanning tree protocol on interface te-1/1/7.
admin@PICOS# set protocols spanning-tree interface te-1/1/7 enable false
admin@PICOS# commit





Copyright © 2024 Pica8 Inc. All Rights Reserved.