set protocols mlag domain peer-ip peer-link

Owned by Tracy Yang
Jul 18, 2024
1 min read

The set protocols mlag domain peer-ip peer-link command configures peer IP address and peer link port.


Command Syntax

set protocols mlag domain <domain-id> peer-ip <peer-ipv4-address> peer-link <peer-interface-name>


Parameters

Parameter

Description

domain <domain-id>

Specifies a domain ID. The value is an integer that ranges from 1 to 255.

peer-ip <peer-ipv4-address>

The IP address of the remote MLAG peer link port. The value is in dotted decimal notation.

peer-link <peer-interface-name >

The interface name of the peer link that is on the peer device, it should be a LAG port.


Example

  • Configure peer IP address and peer link port.
admin@Xorplus# set interface mlag domain 3 peer-ip 10.10.10.1 peer-link ae1

Copyright © 2024 Pica8 Inc. All Rights Reserved.