set protocols mlag domain node

Owned by Tracy Yang
Jul 18, 2024
1 min read

The set protocols mlag domain node command specifies the node ID for the MLAG device.


Command Syntax

set protocols mlag domain <domain-id> node <0 | 1>


Parameters

Parameter

Description

domain <domain-id>

Specifies a domain ID. The value is an integer that ranges from 1 to 255.

node <0 | 1>

Specifies the node ID for the MLAG device. The value could be 0 or 1.


Example

  • Set the node ID for the MLAG device as 0.
admin@Xorplus# set protocols mlag domain 3 node 0

Copyright © 2024 Pica8 Inc. All Rights Reserved.