set protocols ospf area virtual-link dead-interval

Run the command set protocols ospf area virtual-link dead-interval to configure the OSPF neighbor router of a virtual link dead interval in seconds. This value must be the same on all routers in the OSPF domain.

Run the command delete protocols ospf area virtual-link dead-interval to remove this configuration and revert to the default value which is 40 seconds.

Command Syntax

set protocols ospf [vrf <vrf-name>] area {<ipv4>|<area-id>} virtual-link <ROUTER-ID> dead-interval <seconds>

delete protocols ospf [vrf <vrf-name>] area {<ipv4>|<area-id>} virtual-link <ROUTER-ID> dead-interval

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies the name of the VRF for the OSPF instance.
area {<ipv4>\|<area-id>}	Specifies the OSPF area ID. The value could be IPv4 dotted decimal format or an integer that ranges from 0 to 4294967295.
virtual-link <ROUTER-ID>	Configures a virtual link with the specified router ID of the remote ABR.
dead-interval <seconds>	Specifies the OSPF neighbor dead interval in seconds. The value ranges from 1 to 65535. The default interval is 40 seconds.

Example

Configure the OSPF neighbor dead interval to 60 seconds.

admin@XorPlus# set protocols ospf area 1.1.1.1 virtual-link 100.0.1.1 dead-interval 60
admin@Xorplus# commit