set protocols bgp neighbor next-hop-self


The set protocols bgp neighbor next-hop-self  command configures the router as the next hop for a BGP-speaking neighbor or peer group, and enables BGP to send itself as the next hop for advertised routes.
The delete protocols  bgp neighbor next-hop-self command resets the peer nexthop-self status to default. The next hop will be generated based on the IP.


Command Syntax

set protocols bgp [vrf <vrf-name> {neighbor <ip>peer-group <peer-group> |interface <interface>{ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicastnext-hop-self [force]

delete protocols bgp [vrf <vrf-name>] {neighbor <ip>peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicastnext-hop-self [force]


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

{ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast}Specifies the type of the address family.
neighbor <ip>Specifies the IPv4/IPv6 address of a peer.
peer-group <peer-group>Specifies a peer group.
interface <interface>Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.


Example
• This example configures the router as the next hop for a BGP-speaking neighbor or peer group, and enables BGP to send itself as the next hop for advertised routes.

admin@XorPlus# set protocols bgp neighbor 2.2.2.2 ipv4-unicast next-hop-self
admin@XorPlus# commit


Copyright © 2024 Pica8 Inc. All Rights Reserved.