/
run show neighbor snooping binding

run show neighbor snooping binding

Owned by shengxiuhua (Unlicensed)
Last updated: Oct 10, 2024
1 min read

The run show neighbor snooping binding command is used to view ND snooping dynamic management table.

 

Command Syntax

run show neighbor snooping binding

 

Parameter

None.

 

Example

  • View ND snooping dynamic management table.

admin@PICOS# run show neighbor snooping binding Total ND Snooping binding count: 2 MAC Address      IPv6 Address        Port    VLAN ID   Status    Lease(sec) ----------------------------------------------------------------------------- 22:22:22: 22:22:21   FC00:1::E58C:A2E7  ge-1/1/1   10      Valid      99/120 44:44:44: 44:22:21   FC00:1::E58C:A2E6  ge-1/1/2   20      Valid      89/120

Copyright © 2025 Pica8 Inc. All Rights Reserved.