run show neighbor snooping prefix

The run show neighbor snooping prefix command is used to view neighbour discovery snooping prefix management table.

Command Syntax

run show neighbor snooping prefix [static | dynamic]

Parameter

Parameters

Description

[static | dynamic]

Optional. Indicates to show the ND snooping prefix management table configured statically or learned dynamically.

If not specified, the device shows all ND snooping prefix management table entries.

Example

View all the ND snooping prefix management table.

admin@PICOS# run show neighbor snooping prefix
Total Snooping table prefix count:    2
Total Snooping table dynamic count:  1
Total Snooping table static count:     1
Prefix          Length   Port    VLAN ID   Valid-Time   Prefix-Type
-------------------------------------------------------------------
FC00:1::       64       ge-1/1/2    10        100/120      Dynamic
2001:1::        64       ge-1/1/1    10        35/120       Static

View statically configured ND snooping prefix management table.

admin@PICOS# run show neighbor snooping prefix static
Total Snooping table static count: 1
Prefix         Length   Port      VLAN ID   Valid-Time    Prefix-Type
----------------------------------------------------------------------
2001:1::        64     ge-2/1/1     10         35/120       Static

View dynamically learned ND snooping prefix management table.

admin@PICOS# run show neighbor snooping prefix dynamic
Total Snooping table dynamic count:     1
Prefix         Length   Port    VLAN ID   Valid-Time    Prefix-Type
----------------------------------------------------------------------
FC00:1::        64     ge-1/1/2   10        100/120      Dynamic