AS9716-32D Switch

Feature

Detailed Description

Comment

Diagnosis LED

• Solid green – All OK, CLI prompt available

• Blinking green – Boot-up in progress

• Solid amber –System self-diagnostic test has detected a fault (Fan, thermal or any interface fault.).

At front

FAN LED

• Solid green –System FAN operating normally.

• Solid amber –Fan tray present buy system FAN is fault.

• OFF – System OFF.

At front

PS1 LED

• Solid green –This power is operating normally.

• Solid amber –PWR present but not power on or this power is fault.

• OFF – Power supply not present.

At rear

PS2 LED

• Solid green –This power is operating normally.

• Solid amber –PWR present but not power on or this power is fault.

• OFF – Power supply not present.

At front

Locator LED

Not supported.

At front

Only the 1st LED is used when running at 400G without breakout.

Solid Blue - Port linked operating at max port speed 400G.

Off - No link

Flashing Blue - Transmit/Receive is activity.

Only the 1st LED is used when running at 100G without breakout.

Solid Green - Port linked operating at max port speed 100G.

Off - No link

Flashing Green - Transmit/Receive is activity.

All four LEDs are used when running at 4 x100G in breakout mode.

Solid Green - Port linked operating at max port speed 100G

Off - No link

Flashing Green -Transmit/Receive is activity

Feature

Detailed Description

SFP+ 10G management port LED

• Off – No Link

• On/Flashing Green –SFP+ port has a valid link at 10G. Flashing indicates activity.

• On/Flashing Amber –SFP+ port has a valid link at 1G. Flashing indicates activity.

RJ45 10/100/1G Management port LED

• Off – No Link

• On/Flashing Green –Has a valid link. Flashing indicates activity.