N5850-48X6C Switch

PS1

(Power Supply Status)

Green

This power is operating normally.

Amber

PWR present but not power on or this power is fault.

Off

Power supply not present.

PS2

(Power Supply Status)

Green

This power is operating normally.

Amber

PWR present but not power on or this power is fault.

Off

Power supply not present.

Diag

Green

System self-diagnostic test successfully completed.

Amber

System self-diagnostic test has detected a fault. (Fan, thermal or any interface fault.)

FAN

Green

System FAN operating normally.

Amber

Fan tray present buy system FAN is fault.

OFF

System OFF

LOC

Not supported.

1~48 Port LED

On/Flashing

Green

RJ port has a valid link at 10G.

Flashing indicates activity.

On/Flashing

Amber

RJ port has a valid link at 1G.

Flashing indicates activity.

Off

There is no link on the port.

QSFP28 Port LED in 100G Mode

(Port 49~ 54)

On/Flashing

Green

QSFP port has a valid link at 100G.

Flashing indicates activity.

Off

There is no link on the port.

QSFP28 Port LED in 25G Mode

(With Breakout cable)

On/Flashing Amber

QSFP28 port has a valid link at 25G via break out cable. The LED on 100G QSFP end is also present OFF. Flashing indicates activity.

Off

There is no link on the port.

QSFP28 Port LED in 40G Mode

(Port 49~ 54)

On/Flashing blue

QSFP port has a valid link at 100G.

Flashing indicates activity.

Off

There is no link on the port.

QSFP28 Port LED in 10G Mode

(With Breakout cable)

On/Flashing purple

QSFP28 port has a valid link at 10G via break out cable. The LED on 40G QSFP end is also present OFF. Flashing indicates activity.

Off

There is no link on the port.

OOB LED (Link)

On

Port has a valid link

Flashing

Flashing indicates activity

Off

There is no link on the port