run show arp inspection vlan

The run show arp inspection vlan command displays ARP inspection configured information of a VLAN, such as, the configured static access lists of ARP inspection in the VLAN.

Command Syntax

run show arp inspection vlan <vlan-id>

Parameter

Parameter

Description

vlan <vlan-id>

Specifies a VLAN. The value is an integer that ranges from 1 to 4094.

Note: you shold firstly use command set protocols arp inspection vlan to bind ARP inspection and VLAN ID, or vlan-id cannot be set.

Example

Display the configured static access lists of ARP inspection in VLAN 100.

admin@Xorplus# run show arp inspection vlan 100
Vlan  Configuration  Static ACL 
----  -------------  ---------- 
100   Enabled        abc  
                     bbb

Table 1 Description of the run show arp inspection vlan command output

Item	Description
Vlan	Indicates the VLAN ID.
Configuration	Indicates whether ARP inspection is enabled in the VLAN. The value could be Enabled or Disabled.
Static ACL	Indicates static access lists of ARP inspection in the VLAN if configured.