set protocols dhcp snooping option82 remote-id
- Tracy Yang
The set protocols dhcp snooping option82 remote-id command configures the format of sub-option remote ID inserted into the DHCP Option 82 field for DHCP snooping.
NOTE: The sub-option remote ID is applied to VLANs where option82-policy is set to “insert” or “replace”.
Command Syntax
set protocols dhcp snooping option82 remote-id <system-mac | hostname>
Parameters
Parameter | Description |
remote-id <system-mac | hostname> | Specifies the type of remote ID in the Option 82 field. The value could be system-mac or hostname. By default, the sub-option remote ID is not configured which means remote ID is not enabled. |
Usage Guidelines
If configured, the remote ID is unique per switch.
- When “system-mac” is selected, the format of the remote ID is “system MAC”.
- When “hostname” is selected, the format of the remote ID is “hostname”. The value of “hostname” can be set by the following command:
set system hostname <hostname>
Note that, when configuring Option 82 in MLAG environment, remote ID should be set to “system-mac” and circuit ID should be set to “port-index”.
Example
- Configure the type of sub-option remote ID inserted into the DHCP Option 82 field.
admin@Xorplus# set protocols dhcp snooping option82 remote-id system-mac admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.