set protocols dhcp6 snooping option37 remote-id

The set protocols dhcp6 snooping option37 remote-id command configures the format of sub-option remote ID inserted into the Option 37 field for DHCPv6 snooping.

NOTE: The sub-option remote ID is applied to VLANs where option-policy is set to “insert” or “replace”.

Command Syntax

set protocols dhcp6 snooping option37 remote-id <remote-id>

Parameters

Parameter

Description

remote-id <remote-id>

Specifies the type of remote ID in the Option 37 field. The value is a string.

By default, the sub-option remote ID is not configured which means remote ID is not enabled.

Usage Guidelines

If configured, the remote-id field may be used to encode, for instance:

o a "caller ID" telephone number for dial-up connection
o a "user name" prompted for by a Remote Access Server
o a remote caller ATM address
o a "modem ID" of a cable data modem
o the remote IP address of a point-to-point link
o a remote X.25 address for X.25 connections
o an interface or port identifier

Example

Configure the type of sub-option remote ID inserted into the DHCPv6 Option 37 field.

admin@Xorplus# set protocols dhcp6 snooping option37 remote-id Xorplus
admin@Xorplus# commit