set protocols dhcp6 relay interface remote-id

The set protocols dhcp6 relay interface remote-id command configures the remote ID to be inserted into the DHCPv6 relay packets.

Command Syntax

set protocols dhcp6 relay interface <l3-interface-name> remote-id <remote-id>

Parameters

Parameter

Description

interface <l3-interface-name>

Specifies an L3 interface name. The value could be the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name.

Its the outbound interface of relay messages.

remote-id <remote-id>

Specifies the remote ID. The value is a string.

Usage Guidelines

The Remote ID records user access information in the DHCPv6 packets sent from the clients to the device. When receiving the request packets sent from the DHCPv6 clients and forwarding the packets to the DHCPv6 server, the DHCPv6 relay can insert the Remote ID to the packets to identify the DHCPv6 client location information. The location information can be used by the DHCPv6 server to assign IPv6 addresses and network parameters.

Example

Configure the remote ID to be inserted into the DHCPv6 relay packets.

admin@Xorplus# set protocols dhcp6 relay interface vlan100 remote-id ubuntuDesktop16.04.6-2
admin@Xorplus# commit