set protocols sflow interface header-len

Users can set the Length of sampled packet in bytes.

Command Syntax
set protocols sflow interface <port> header-len <value>
delete protocols sflow interface <port> header-len

Parameters

Parameter	Description
interface <port>	Ethernet switching port identifier,the valid ports range 1-52
header-len <value>	The length identifier, [14..9216]

Example
• This example is to set header length sampled packets to 15 on ge-1/1/3:

admin@XorPlus# set protocols sflow interface ge-1/1/3 header-len 15
admin@XorPlus#