run show igmp-snooping groups

The run show igmp-snooping groups command shows information about multicast group member ports which is used for Layer 2 forwarding, namely, the Layer 2 forwarding table.

Command Syntax

run show igmp-snooping groups [vlan <vlan-id>]

Parameter

Parameter	Description
vlan <vlan-id>	Optional. Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094.

Example

Show the information about multicast group member ports.

admin@XorPlus# run show igmp-snooping groups
Vlan      Group                    Port List          Type
--------  ------------------   -----------------   ----------------------
1         238.255.0.1              ge-1/1/2           Static               
                                   ge-1/1/1           Mrouter