set vxlans vni mcast-group

The set vxlans vni mcast-group command is used to enable the multicast replication function of BUM message and to configure the multicast replication address of VNI.

NOTE:

PICOS supports only one VXLAN segment mapping to one IP multicast group, which is the way to provide the optimal multicast forwarding. That is, to have multiple VXLAN segments share a single IP multicast group in the core network is not supported.

Command Syntax

set vxlans vni <vni-id> mcast-group <ip-address>

delete vxlans vni <vni-id> mcast-group <ip-address>

Parameters

Parameter	Description
vni <vni-id>	Specifies the layer 3 VNI ID.
mcast-group <ip-address>	Specifies the multicast replication address.

Example

This example enables the multicast replication function.

admin@XorPlus# set vxlans vni 1 mcast-group  1.1.1.1
admin@XorPlus# commit