set vxlans l3-vni

The command set vxlans l3-vni is used to add the L3 VNI ID to VXLAN routing. It will advertise the Type-2 host advertisements and Type-5 prefix routes for the VNI. The optional argument prefix-routes-only can be added to the command to advertise the prefix routes only. This configuration is used in EVPN Asymmetric routing to sync external routes between devices.

Run the command delete vxlans l3-vni to remove this configuration from the system.

Command Syntax

set vxlans [vrf <vrf-name>] l3-vni <vni-id> [prefix-routes-only]

delete vxlans [vrf <vrf-name>] l3-vni <vni-id> [prefix-routes-only]

Parameters

Example

This example demonstrates how to enable  advertisement of Type-2 and Type-5 routes for a given VRF and VNI ID.