set protocols mlag domain node

Owned by Tracy Yang
Nov 18, 2024

The set protocols mlag domain node command specifies the node ID for the MLAG device.


Command Syntax

set protocols mlag domain <domain-id> node <0 | 1>


Parameters

Parameter

Description

domain <domain-id>

Specifies a domain ID. The value is an integer that ranges from 1 to 255.

node <0 | 1>

Specifies the node ID for the MLAG device. The value could be 0 or 1.


Example

  • Set the node ID for the MLAG device as 0.
admin@Xorplus# set protocols mlag domain 3 node 0
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.