/
protocols dhcp relay vlan-interface

protocols dhcp relay vlan-interface

Owned by Tracy Yang (Unlicensed)
Dec 05, 2019

To configure DHCP relay agent on a VLAN interface, use the set protocols dhcp relay vlan-interface command in L2/L3 configuration mode.

Command Syntax

set protocols dhcp relay vlan-interface vlan-interface-name { dhcp-server-address1 address | dhcp-server-address2 address | dhcp-server-address3 address | dhcp-server-address4 address }

Parameters

vlan-interface-nameVLAN interface name.
addressIP address of the DHCP server.

Example

The following example configures DHCP relay agent for the VLAN interface vlan100:

admin@Switch# set protocols dhcp relay vlan-interface vlan100 dhcp-server-address1 192.168.2.1

Copyright © 2025 Pica8 Inc. All Rights Reserved.