/
protocols dhcp relay vlan-interface disable
protocols dhcp relay vlan-interface disable
- Tracy Yang (Unlicensed)
Owned by Tracy Yang (Unlicensed)
Dec 05, 2019
Loading data...
To enable the dhcp-relay service, use the set protocols dhcp relay vlan-interface disable command in L2/L3 configuration mode.
Command Syntax
set protocols dhcp relay vlan-interface interface-name disable { true | false }
Parameters
| interface-name | VLAN interface name. |
| true | Disable DHCP relay service. |
| false | Enable DHCP relay service. |
Examples
The following example enables the DHCP relay service for the vlan100 interface:
admin@Switch# set protocols dhcp relay vlan-interface vlan100 disable false
Copyright © 2025 Pica8 Inc. All Rights Reserved.