/
protocols ospf4 router-id
protocols ospf4 router-id
- Tracy Yang (Unlicensed)
Owned by Tracy Yang (Unlicensed)
Dec 05, 2019
Loading data...
The router ID should be configured first for the switch when users configure OSPF. The router ID is a string similar to the IP address, and should be unique in the OSPF domain. Users should not change the router ID after completing the configuration.
Command Syntax
set protocols ospf4 router-id <router-id>
Parameter
• <router-id>A unique 32-bit identifier within this AS.
Example
• This example configure router ID for the switch.
admin@XorPlus# set protocols ospf4 router-id 1.1.1.1 admin@XorPlus# commit
Copyright © 2025 Pica8 Inc. All Rights Reserved.