/
show system management-ethernet
show system management-ethernet
- Tracy Yang (Unlicensed)
Owned by Tracy Yang (Unlicensed)
Mar 16, 2021
Loading data...
The show system management-ethernet command shows the configuration information, status and traffic statistics information of the management interface.
Command Syntax
show system management-ethernet [eth0 | eth1]
Parameter
None.
Example
- Run run show system management-ethernet eth0 command to view the configuration information, status and traffic statistics information of the management interface.
admin@XorPlus# run show system management-ethernet eth0
eth0 Hwaddr: 00:18:23:30:e5:72 State: UP
Gateway : 192.168.10.1
Inet addr:
192.168.10.5/24
Traffic statistics
Input Packets......................3620
Input Bytes........................462971
Output Packets.....................597
Output Bytes.......................75459
Copyright © 2025 Pica8 Inc. All Rights Reserved.