show system management-ethernet
The show system management-ethernet command shows the configuration information, status and traffic statistics information of the management interface.
Command Syntax
show system management-ethernet
Parameter
None.
Example
Run run show system management-ethernet command to view the configuration information, status and traffic statistics information of the management interface.
admin@Xorplus# run show system management-ethernet eth0 Hwaddr: 68:21:5f:7f:10:c5 State: UP Gateway : 192.168.10.1 Inet addr: 192.168.10.5/24 fe80::6a21:5fff:fe7f:10c5/64 Traffic statistics Input Packets......................222156 Input Bytes........................13775674 Output Packets.....................1471 Output Bytes.......................140558 eth1 Hwaddr: 68:21:5f:7f:10:c9 State: UP Inet addr: fe80::6a21:5fff:fe7f:10c9/64 Traffic statistics Input Packets......................0 Input Bytes........................0 Output Packets.....................63 Output Bytes.......................4546
Copyright © 2024 Pica8 Inc. All Rights Reserved.