PICOS Documentation

PICOS-4.3.3_Configuration_Guide

All content
Space settings

Results will update as you type.

•
run show system rpsu
•
run show system serial-number
•
run show system temperature
•
run show system uptime
•
run show system users
•
set system aaa local disable
•
set system aaa radius accounting disable
•
set system aaa radius accounting server-ip
•
set system aaa radius accounting server-ip port
•
set system aaa radius accounting server-ip shared-key
•
set system aaa radius accounting server-ip timeout
•
set system aaa radius authorization disable
•
set system aaa radius authorization server-ip
•
set system aaa radius authorization server-ip port
•
set system aaa radius authorization server-ip shared-key
•
set system aaa radius authorization server-ip timeout
•
set system aaa radius vrf mgmt-vrf
•
set system aaa tacacs-plus accounting
•
set system aaa tacacs-plus authorization
•
set system aaa tacacs-plus auth-type
•
set system aaa tacacs-plus disable
•
set system aaa tacacs-plus key
•
set system aaa tacacs-plus port-number
•
set system aaa tacacs-plus timeout
•
set system aaa tacacs-plus server-ip
•
set system aaa tacacs-plus source-interface
•
set system aaa local-auth-fallback disable
•
set system aaa tacacs-plus vrf mgmt-vrf
•
set system hostname
•
set system inband vlan-interface
•
set system inband loopback
•
set system inband routed-interface
•
set system inband enable
•
system login-acl network
•
system login announcement
•
system login user
•
system login user admin class
•
set system login user authentication plain-text-password
•
system login user class
•
set system timezone
•
set system ntp server-ip
•
set system ntp source-interface
•
set system ntp vrf mgmt-vrf
•
set interface gigabit-ethernet ptp mode
•
set system services ssh connection-limit
•
set system services ssh disable
•
set system services ssh protocol-version v2
•
set system services ssh rate-limit
•
set system services ssh root-login
•
set system services ssh idle-timeout
•
set system services ssh port
•
set system snmp-acl security-name network
•
set system syslog server-ip
•
set system syslog local-file
•
set system syslog vrf mgmt-vrf
•
set system usb disable
•
set system management-ethernet eth0 ip-address {IPv4 | IPv6}
•
set system management-ethernet eth0 ip-gateway {IPv4 | IPv6}
•
set system management-ethernet eth1 ip-address {IPv4 | IPv6}
•
set system management-ethernet eth1 ip-gateway {IPv4 | IPv6}
•
show system management-ethernet
•
run request system reboot
•
run show system hwinfo
•
ping
•
traceroute
•
tftp
•
set protocols sflow collector vrf mgmt-vrf
•
scp
•
set system login banner
•
upgrade2 image-file
•
upgrade2 image-file backup-file
•
upgrade2 image-file factory-default
•
upgrade2 image-file use-prev-config
•
set system dns-server-ip
•
set system console idle-timeout
•
set system login multiline-banner message
•
set system login multiline-announcement message
•
set system aaa radius source-interface
•
set protocols grpc enable
•
set protocols grpc port
Mirror Configuration Commands
•
set system ztp enable

You‘re viewing this with anonymous access, so some content might be blocked.

/

Mirror Configuration Commands

Mirror Configuration Commands

Owned by Tracy Yang (Unlicensed)

Mar 03, 2023

Loading data...

set interface ethernet-switching-options analyzer input
set interface ethernet-switching-options analyzer output
set interface ethernet-switching-options analyzer erspan input
set interface ethernet-switching-options analyzer erspan output source-ip
set interface ethernet-switching-options analyzer erspan output dest-ip
set interface ethernet-switching-options analyzer erspan output vrf
run show analyzer
set firewall filter sequence then erspan source-ip
set firewall filter sequence then erspan dest-ip
set firewall filter sequence then erspan vrf
set firewall filter sequence then erspan ttl

Copyright © 2025 Pica8 Inc. All Rights Reserved.

{"serverDuration": 10, "requestCorrelationId": "bb4f0a383286401b9d933185d58861f9"}