upgrade2 image-file factory-default

The upgrade2 image-file factory-default command upgrades the system by using upgrade2 command and recoveries configuration to factory default settings.

Command Syntax

upgrade2 image-file <image-name> factory-default

Parameter

Parameter	Description
image-file <image-name>	Specifies the image name with bin format (*.bin).

Usage Guidelines

Before upgrading, save the important data in Flash to the local PC through FTP or TFTP, and then upload it to the switch after the upgrade is completed.

Example

Upgrade the system by using upgrade2 command and recovery configuration to factory default settings.

admin@Xorplus> upgrade2 image-file onie-installer-picos-3.7.3-91bb175-x86.bin factory-default