set protocols sflow collector vrf mgmt-vrf

Owned by Tracy Yang (Unlicensed)
Mar 03, 2023
1 min read

The set protocols sflow collector vrf mgmt-vrf command configures to run the sFlow service in management VRF.


Command Syntax

set protocols sflow collector <ip-address> vrf mgmt-vrf


Parameter

Parameter

Description

collector <ip-address>

Specifies an IP address of the sFlow collector. The value is an IPv4/IPv6 address.


Usage Guidelines

SFlow service runs in the default VRF by default, and supports to be configured in the management VRF. The corresponding collector is required to be route reachable in the VRF running sFlow service.

Note: The latest configuration overrides the previous one.


Example

  • Configure the sFlow service to run in the management VRF.
admin@Xorplus# set protocols sflow collector 10.10.10.1 vrf mgmt-vrf
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.