set system ntp server-ip
- Tracy Yang (Unlicensed)
Owned by Tracy Yang (Unlicensed)
Mar 03, 2023
1 min read
Loading data...
The set system ntp server-ip command configures the IP address of the remote NTP server.
Note: the route between NTP server and NTP source interface is required to be reachable.
Command Syntax
set system ntp server-ip <ipv4-address>
Parameter
Parameter | Description |
server-ip <ipv4-address> | Specifies the IPv4 address of the remote server. The value is an IPv4 address, e.g. 192.168.10.100. |
Example
- Configure the IP address of the remote NTP server.
admin@XorPlus# set system ntp server-ip 192.168.10.100 admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.