set protocols bgp neighbor send-community

The set protocols bgp neighbor send-community command enables community and/or extended community exchange with the specified neighbor. When this command is configured for the peer-group, then all the neighbors that are part of peer-group will send the community values to the peers.
The delete protocols bgp neighbor send-community command will not allow the neighbor to send community values to the specific neighbors that are part of peer-group.

Command Syntax

set protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} send-community type [both|extended|standard|large|all]

delete protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} send-community type [both|extended|standard|large|all]

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].
{ipv4-unicast\|ipv4-labeled-unicast\|ipv6-unicast\|ipv6-labeled-unicast}	Specifies the type of the address family.
neighbor <ip>	Specifies the IPv4/IPv6 address of a peer.
peer-group <peer-group>	Specifies a peer group.
interface <interface>	Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.
[both\|extended\|standard\|large\|all]	Optional. The parameters standard, large and extended send only the respective community numbers. all: both standard and extended communities will be sent to the neighbor.

Example
• This example allows community values to be sent to a specific neighbor.

admin@XorPlus# set protocols bgp neighbor 2.2.2.2 ipv4-unicast send-community type both
admin@XorPlus# commit