set protocols bgp neighbor addpath-tx-all-paths
The set protocols bgp neighbor addpath-tx-all-paths command advertises all known paths to a neighbor.
The delete protocols bgp neighbor addpath-tx-all-paths command disables the additional path feature.
Command Syntax
set protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} addpath-tx-all-paths
delete protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} {ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} addpath-tx-all-paths
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
{ipv4-unicast|ipv4-labeled-unicast|ipv6-unicast|ipv6-labeled-unicast} | Specifies the type of the address family. |
neighbor <ip> | Specifies the IPv4/IPv6 address of a peer. |
peer-group <peer-group> | Specifies a peer group. |
interface <interface> | Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name. |
Example
• This example advertises all known paths to a neighbor.
admin@XorPlus# set protocols bgp neighbor 2.2.2.2 ipv4-unicast addpath-tx-all-paths admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.