set protocols igmp-snooping vlan-id querier other-querier-timer
The set protocols igmp-snooping vlan-id querier other-querier-timer command configures the IGMP snooping querier other-querier-timer.
Command Syntax
set protocols igmp-snooping vlan-id <vlan-id> querier other-querier-timer <other-querier-timer>
Parameter
Parameter | Description |
vlan-id <vlan-id> | Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094. |
other-querier-timer <other-querier-timer> | Specifies the IGMP snooping querier other-querier-timer. The value is an integer, in seconds, that ranges from 1 to 1000. The default value is 120. |
Usage Guidelines
You can enable IGMP snooping querier function on the Layer 2 device to send IGMP query messages to take the querier role similar to Layer 3 multicast devices. If the Layer 2 querier receives an IGMP general query message sent by the upstream Layer 3 querier device, it will forward the IGMP general query message to all ports excluding the port receiving the messages of the VLAN. The IGMP snooping general query packets originally produced and planned to be sent by the Layer 2 querier devices are delayed and will be sent after the time of other-querier-timer.
Example
- Â Configure the IGMP snooping querier other-querier-timer.
admin@XorPlus# set protocols igmp-snooping vlan-id 2 querier other-querier-timer 12 admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.