run show igmp-snooping

The run show igmp-snooping command shows the configuration information of IGMP snooping.

Command Syntax

run show igmp-snooping [vlan <vlan-id>]

Parameter

Parameter	Description
vlan <vlan-id>	Optional. Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094.

Example

Show the configuration information of IGMP snooping.

admin@XorPlus# run show igmp-snooping
Global IGMP Snooping configuration:
-------------------------------------------
IGMP snooping             : Enabled
Report suppression           : Enabled
Robustness variable          : 2
Router aging time            : 260
Max response time            : 10
Query interval               : 60
Last member query count      : 2
Last member query interval   : 2

Show the IGMP snooping configuration of a specific VLAN.

admin@XorPlus# run show igmp-snooping vlan 1
Vlan 1:
----------------------------------------------
IGMP snooping                       : Enabled
IGMPv2 fast leave                   : Enabled
IGMP querier state                  : Enabled
IGMP querier source ip address      : 0.0.0.0
IGMP other querier timer            : 1
IGMP querier version                : 2