set protocols igmp interface

The set protocols igmp interface command enables IGMP on an L3 interface.

Command Syntax
set protocols igmp interface <interface-name>
delete protocols igmp interface <interface-name>

Parameter

Parameter	Description
interface <interface-name>	Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name. The value is a string.

Usage Guidelines

On a shared network segment, user hosts and Layer 3 multicast devices directly connected to the user network segment must run IGMP. A multicast device can process IGMP messages sent from user hosts only after IGMP is enabled on the interfaces connected to user network segments.

Example
• This example enables IGMP on vlan2:

admin@XorPlus# set protocols igmp interface vlan2
admin@XorPlus# commit