run show igmp interface
The run show igmp interface command displays information about IGMP interfaces.
Command Syntax
run show igmp interface [<interface-name>]
Parameter
Parameter | Description |
<interface-name> | Optional. Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name. The value is a string. |
Example
- Display the IGMP configuration and running information on VLAN771.
admin@XorPlus# run show igmp interface vlan771 Interface : vlan771 State : up Address : 71.1.1.166 Uptime : 00:11:18 Version : 3 Querier ------- Querier : local Start Count : 0 Query Timer : 00:01:43 Other Timer : --:--:-- Timers ------ Group Membership Interval : 260s Last Member Query Count : 2 Last Member Query Time : 2s Older Host Present Interval : 260s Other Querier Present Interval : 255s Query Interval : 125s Query Response Interval : 10s Robustness Variable : 2 Startup Query Interval : 31s Flags ----- All Multicast : no Broadcast : yes Deleted : no Interface Index : 52 Multicast : yes Multicast Loop : 0 Promiscuous : no
- Display information about all IGMP interfaces.
admin@XorPlus# run show igmp interface Interface State Address V Querier Query Timer Uptime vlan2 up 10.10.60.10 2 local 00:00:40 02:13:12 vlan3 up 10.10.61.10 3 local --:--:-- 00:36:29
Copyright © 2024 Pica8 Inc. All Rights Reserved.