set protocols pim interface use-source

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023

The set protocols pim interface use-source command is used to configure the source IP address.


Command Syntax

set protocols pim interface <interface-name> use-source <source-ip>


Parameter

Parameter

Description

interface <interface-name>

Specifies an L3 interface. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.The value is a string.

use-source <source-ip>

Specifies the source IP address.


Usage Guidelines

If you have multiple addresses configured on a particular interface and would like pim to use a specific source address associated with that interface.


Example

  • Configure the source IP address for the PIM interface vlan-2 to 192.168.10.1.
admin@Xorplus# set protocols pim interface vlan-2 use-source 192.168.10.1
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.