run show dhcp server binding interface
The run show dhcp server binding interface command displays the allocated IP address binding information based on the VLAN interface and configuration information of other parameters, including DNS server, domain name and default router.
Command Syntax
run show dhcp server binding interface {all | <interface-name>}
Parameter
Parameter | Description |
interface {all | <interface-name>} | Specifies an L3 VLAN interface name. The value could be all or a specific VLAN interface name, where all indicates to show DHCP client information of all the VLAN interfaces. |
Example
- View the allocated IP address binding information based on the VLAN interface.
admin@Xorplus# run show dhcp server binding interface vlan100 2 bound clients Client Interface: vlan100 MAC address: 00:0a:12:00:12:11 Client IP Address: 10.1.1.88 MAC address: 00:0a:12:00:12:12 Client IP Address: 10.1.1.89 DHCP Options : Name: dhcp-lease-time, Value: 43200 minutes Name: name-server, Value: [ 10.209.194.131, 198.51.110.2, 192.0.2.3 ] Name: server-identifier, Value: 10.1.1.1 Name: router, Value: [ 10.1.1.1 ] Name: domain-name, Value: example-50
Table 1. Description of the run show dhcp server binding interface command output
Item | Description |
MAC address | Indicates the MAC address of a DHCP client. |
Client IP Address | Indicates the IP address of a DHCP client. |
Name: dhcp-lease-time | Indicates the lease time of the IP addresses. |
Name: name-server | Indicates the IP address of the DNS server. |
Name: server-identifier | Indicates the IP address of Layer 3 VLAN interface connected to the DHCP client. |
Name: router | Indicates the default gateway for the DHCP clients. |
Name: domain-name | Indicates the domain name for the DHCP clients. |
Copyright © 2024 Pica8 Inc. All Rights Reserved.