protocols sflow source-address

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read

Users can set the source address as the source in packets transmitted to collectors.


Command Syntax
set protocols sflow source-address <IPv4>


Parameter
•<IPv4>source address as the source in packets transmitted to collectors


Example
• This example is to set source-address to 10.10.50.248:

admin@XorPlus# set protocols sflow source-address 10.10.50.248 
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.