set protocols dhcp snooping binding write-delay

The set protocols dhcp snooping binding write-delay command configures a delay timer for writing the DHCP snooping entries from memory to the binding file.

Command Syntax

set protocols dhcp snooping binding write-delay <write-delay-timer>

Parameters

Parameter	Description
write-delay <write-delay-timer>	Specifies a delay timer for writing the DHCP snooping entries from the memory to the binding file. The value is an integer in seconds that ranges from 15 to 86400. The default value is 300s.

Usage Guidelines

In order to reduce the system burden caused by frequent file writes, you can configure a delay timer for writing the DHCP snooping entries from memory to the binding file.

NOTE:

In the case when the DHCP snooping entry is changed by the administrator configuration modifications from the CLI, such as modifying the VLAN, the binding file will be immediately refreshed rather than wait for write-delay timer.

Example

Configure a delay timer for writing the DHCP snooping entries from memory to the binding file.

admin@Xorplus# set protocols dhcp snooping binding write-delay 24
admin@XorPlus# commit