run show dhcp snooping binding

The run show dhcp snooping binding command displays the DHCP snooping binding table, which includes the user MAC address, IP address, VLAN ID, access interface and the lease time.

Command Syntax

Parameter

None.

Example

Show the DHCP snooping binding table.

admin@Xorplus# run show dhcp snooping binding
Total count:     2
MAC Address         IP Address     Port            VLAN ID   Lease(sec)                  
--------------------------------------------------------------------------------------------
e4:f0:04:89:b6:46   0.0.0.0         ae65            1         0/0                                              
14:18:77:18:2c:b9   100.1.1.1       ae25            125       599/600

Table 1. Description of the run show dhcp snooping binding command output

Item	Description
Mac Address	User MAC address.
IP Address	User IP address.
Port	User access interface.
VLAN ID	User VLAN ID.
Lease(sec)	Lease time for the IP address, in seconds. The format displayed is Remaining Lease Time/Total Lease Time.