run show lldp neighbor
The run show lldp neighbor command displays the neighbor device information of a specified interface or all the interfaces enabled LLDP.
Command Syntax
run show lldp neighbor [<interface-name> | all] [detail]
Parameter
Parameter | Description |
[<interface-name> | all] | Optional. Specifies an interface name or all. all indicates to show the neighbor device information of all the interfaces enabled LLDP. If not specified, it will show the neighbor device information of all the interfaces enabled LLDP. |
detail | Optional. Show details of the neighbor device information. If not specified, it will show the brief information of the neighbor device. |
Example
Display the details of neighbor device information of all the interfaces enabled LLDP.
admin@XorPlus# run show lldp neighbor all detail
Local Port: te-1/1/1
LLDP info:
---------------------------------------------------------------------------------------
Time To Live: 106
Chassis Id: 68:21:5F:7F:10:C6
Port ID: te-1/1/1
Port Description: te-1/1/1
System Name: PICOS
System Description: Pica8, Inc.,AS5835_54T, PICOS 4.3.2/9b1219e332
System Capability: B, RBridge, Router
System Enabled Capability: Bridge, Router
Management Address: 10.10.51.12
Default VLAN ID: 1
Auto Negotiation: Supported, Enabled
Physical media capabilities: Others, 10base_T, 100base_TX, 100base_TXFD, 1000base_T, 1000base_TFD
Media Attachment Unit type: 1000base_T_Full_Duplex
802.3 Power via MDI :Not available
LLDP MED is not Enabled.
Total entries displayed: 1