set l3-interface tunnel address
Run the command set l3-interface tunnel address to configure a GRE tunnel name and tunnel interface IP address.
Use the command delete-interface tunnel address to delete this tunnel from the switch configuration.
NOTEs:
Note that before committing this configuration, make sure you have configured the tunnel mode as gre-ip by using the command set l3-interface tunnel tunnel-mode.
Command Syntax
set l3-interface tunnel <tunnel-name> address <ip-address> prefix-length <prefix-length>
delete l3-interface tunnel <tunnel-name> address <ip-address> prefix-length <prefix-length>
Parameter
Parameter | Description |
tunnel <tunnel-name> | Specifies the tunnel name, in alpha-numeric format with no spaces. |
address <ip-address> | Specifies the tunnel interface IPv4 or IPv6 address. |
prefix-length <prefix-length> | Specifies the IP prefix length. |
Example
- Create a GRE tunnel tn14 and assign 192.168.8.1 as the tunnel interface address with prefix length 24.
admin@switch1# set l3-interface tunnel tnl4 address 192.168.8.1 prefix-length 24 admin@switch1# set l3-interface tunnel tnl4 tunnel-mode gre-ip admin@switch1# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.