set l3-interface tunnel destination

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023

Run the command set l3-interface tunnel destination to configure the GRE tunnel destination IPv4 address.

Run the command delete l3-interface tunnel destination to delete this configuration.


Command Syntax

set l3-interface tunnel <tunnel-name> destination <IPv4-address>

delete l3-interface tunnel <tunnel-name> destination <IPv4-address>


Parameter

Parameter

Description

tunnel <tunnel-name>

Specifies the name of the tunnel, its value is alpha-numeric with no spaces.

destination <IPv4-address>Specifies the GRE tunnel destination IP address in IPv4 format.

Example

  •  Configure the destination GRE tunnel IPv4 address for tunnel tnl4.
admin@XorPlus# set l3-interface tunnel tnl4 destination 1.1.1.1
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.