run show mvrp interface
The run show mvrp interface command is used to view MVRP information on a specific interface, including MVRP Status, Registrar State, Timers and VLANs learned by the interface through MVRP.
Command Syntax
run show mvrp interface <interface-name>
Parameter
Parameter | Description |
interface <interface-name> | Specifies an interface name that enabled MVRP. The value could be a physical interface or a LAG interface. |
Example
- View the configuration information of MVRP.
admin@PICOS# run show mvrp interface te-1/1/21 Port      Status     Registrar State te-1/1/21    enabled    normal Port      Leave Timeout LeaveAll Timeout Periodic Timeout te-1/1/21    5          60          1 Port      Vlans Added te-1/1/21    10, 11
Copyright © 2024 Pica8 Inc. All Rights Reserved.