upgrade2 image-file factory-default

Owned by Tracy Yang (Unlicensed)
Apr 26, 2023
1 min read

The upgrade2 image-file factory-default command upgrades the system by using upgrade2 command and recoveries configuration to factory default settings.


Command Syntax

upgrade2 image-file <image-name> factory-default


Parameter

Parameter

Description

image-file <image-name>

Specifies the image name with bin format (*.bin).


Usage Guidelines

Before upgrading, save the important data in Flash to the local PC through FTP or TFTP, and then upload it to the switch after the upgrade is completed.


Example

  • Upgrade the system by using upgrade2 command and recovery configuration to factory default settings.
admin@Xorplus> upgrade2 image-file onie-installer-picos-3.7.3-91bb175-x86.bin factory-default


Copyright © 2024 Pica8 Inc. All Rights Reserved.