set protocols arp interface address mac-address

Owned by Tracy Yang
Nov 13, 2023
1 min read

The set protocols arp interface address mac-address command configures a static ARP entry.


Command Syntax
set protocols arp interface <interface> address <ipv4-addr> mac-address <mac-addr>
delete protocols arp interface <interface> address <ipv4-addr> mac-address <mac-addr>


Parameter

Parameter

Description

interface <interface>Specifies the outbound interface in a static ARP entry. The value could be the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name.

address <ipv4-addr>

Specifies the IPv4 address in a static ARP entry.
mac-address <mac-addr>Specifies the MAC address in a static ARP entry.


Example

  • Configure a static ARP entry that maps the IP address 10.10.60.1 to the MAC address 22:11:11:11:11:11.
admin@XorPlus# set protocols arp interface vlan4 address 10.10.60.1 mac-address 22:11:11:11:11:11
admin@XorPlus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.