run show arp inspection interface

The run show arp inspection interface command displays the trust state of all the interfaces for ARP inspection.

Command Syntax

run show arp inspection interface

Parameter

None.

Example

Display the trust state of all the interfaces for ARP inspection.

admin@Xorplus# run show arp inspection interface
Interface   Trust State
----------  -----------
ge-1/1/1    Untrusted  
ge-1/1/2    Trusted  
...
ge-1/1/47   Untrusted  
ge-1/1/48   Untrusted  
te-1/1/1    Untrusted  
te-1/1/2    Untrusted

Table 1 Description of the run show arp inspection interface command output

Item

Description

Interface

Indicates the interface name.

Trust State

Indicates the trust state of all the interfaces for ARP inspection. The value could be Untrusted or Trusted.

The value is Trusted if the interface has been configured as trust port by using the command set protocols arp inspection trust-port <port-name>. Else, it prints Untrusted.