set interface gigabit-ethernet cdr

The set interface gigabit-ethernet cdr command configures whether to enable or disable the CDR function.

NOTE:

- CDR function can only be configured on the 100G or 40G optical module interface and the four interfaces it breaked out from.
- The CDR configurations of the four interfaces which breaked out from the 100G or 40G optical module interface should be the same.

Command Syntax

set interface gigabit-ethernet <interface-name> cdr [true | false]

Parameter

Description

gigabit-ethernet <interface-name>

Specifies the physical interface or split interface name. For example, te-1/1/49 and xe-1/1/49.1.

cdr [true | false]

Configures whether to enable or disable the CDR function. The value is true or false.

true: enables the CDR function.

false: disables the CDR function.

The default value is true.

Example
• Enable the CDR function on interface te-1/1/49.

admin@Xorplus# set interface gigabit-ethernet te-1/1/49 cdr true
admin@Xorplus# commit

• Disable the CDR function on interface te-1/1/49.

admin@Xorplus# set interface gigabit-ethernet te-1/1/49 cdr false
admin@Xorplus# commit