set system management-ethernet eth0 ip-address {IPv4 | IPv6}

Owned by Tracy Yang
Nov 28, 2023
1 min read

The set system management-ethernet eth0 ip-address {IPv4 | IPv6} command sets a static IP address for management interface eth0.

 

Command Syntax

set system management-ethernet eth0 ip-address {IPv4 | IPv6} <ip_address>

 

Parameter

Parameter

Description

{IPv4 | IPv6} <ip_address>

Specifies the IP address for management interface eth0.

When assigning an IPv4 address, the value is in dotted decimal notation.

When assigning an IPv6 address, the value is a 32-digit hexadecimal number, in the format X:X:X:X:X:X:X:X, an X contains 4 hexadecimal numbers.

 

Example

  •  Set the IP address 192.168.10.5/24 for management interface eth0.
admin@Xorplus# set system management-ethernet eth0 ip-address IPv4 192.168.10.5/24
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.