set system ntp vrf mgmt-vrf

Owned by Tracy Yang
Nov 28, 2023
1 min read

The set system ntp vrf mgmt-vrf command configures to run the NTP protocol inmanagement VRF.


Command Syntax

set system ntp vrf mgmt-vrf


Parameter

None.


Usage Guidelines

NTP protocol runs in the default VRF by default, and supports to be configured in the management VRF. The corresponding NTP server is required to be route reachable in the VRF running NTP protocol.

Note: The latest configuration overrides the previous one.


Example

  • Configure the NTP protocol to run in the management VRF.
admin@Xorplus# set system syslog vrf mgmt-vrf
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.